• About Us
    • ꀶ Our story
    • ꁘ Contact Us
  • Products
    • Gas fire extinguishing device series
    • Aerosol fire extinguishing device
    • High pressure water spray extinguisher
    • Superfine dry powder extinguisher
    • Foam fire extinguishing agent
    • Water fire extinguishing agent
    • Water-based fire extinguishers
    • Civil building fire ventilation fan
    • Factory workshop ventilation/fire valve
    • Fire smoke exhaust system &valve
  • Support
    • ꀳ Warranty
    • ꄆ Download
    • Technology
  • Cases
  • FAQ
  • About Us
    • ꀶ Our story
    • ꁘ Contact Us
  • Products
    • Gas fire extinguishing device series
    • Aerosol fire extinguishing device
    • High pressure water spray extinguisher
    • Superfine dry powder extinguisher
    • Foam fire extinguishing agent
    • Water fire extinguishing agent
    • Water-based fire extinguishers
    • Civil building fire ventilation fan
    • Factory workshop ventilation/fire valve
    • Fire smoke exhaust system &valve
  • Support
    • ꀳ Warranty
    • ꄆ Download
    • Technology
  • Cases
  • FAQ
Home  ꄲ  Superfine dry powder extinguishing agent  ꄲ  Non-pressurized Ultra-fine Dry Powder Fire Extinguishing System (Wall-mounted)
ꁆ ꁇ

Non-pressurized Ultra-fine Dry Powder Fire Extinguishing System (Wall-mounted)

The device uses a new driving agent (solid gas conversion), the effect is better than other similar products used in the gas driving agent

PRODUCT DETAILS

Overview:
The system uses a new type of driving agent (solid-to-gas conversion), which outperforms other similar products that use gas-based driving agents. It features low noise, minimal recoil, and long duration. Additionally, when activated, it does not cause secondary damage to the protected objects or buildings. The system employs a small nozzle and powder-dispersion plate structure, maximizing the efficient fire suppression performance of the ultra-fine dry powder agent. This makes it an ideal new-generation automatic fire suppression product.

 

Working Principle:
When the activation signal (automatic or manual) is received, the initiator ignites the gas-producing agent. The agent is activated and rapidly produces gas, which quickly expands inside the casing, increasing internal pressure. Once the gas pressure reaches a certain level, the gas mixes thoroughly with the ultra-fine dry powder. The pressure causes the aluminum membrane of the nozzle to rupture, allowing the ultra-fine dry powder to rapidly spray into the protected area and quickly spread in all directions, forming a fully submerged mist-like fire suppression state. The flames are extinguished through the combined physical and chemical effects of the ultra-fine dry powder fire extinguishing agent.

 

 

 

 

 

ꄴPrevious： Non-pressurized Ultra-fine Dry Powder Fire Extinguishing System（suspension type）
ꄲNext： Non-pressurized Ultra-fine Dry Powder Fire Extinguishing System (Wind Power Special)

Related Products